Compressor Diagnosis
We test winding resistance, check for shorts to ground, measure locked-rotor amperage and rule out capacitor, contactor and control failures before concluding the compressor itself needs replacement.
Cooling and HVAC
Professional AC compressor replacement in Roswell: failure diagnosis, nitrogen-purged brazing, deep evacuation and accurate charging. Call (770) 661-0066.
The compressor is the heart of an air conditioner or heat pump, pumping refrigerant through the system so heat can be moved out of your home. When it fails, cooling stops completely. Signs of trouble include an outdoor unit that hums but will not start, a breaker that trips each time the system kicks on, loud clanking or grinding, and warm air despite a running fan. Before recommending AC compressor replacement in Roswell, we confirm the compressor is actually at fault, since a failed capacitor, contactor or wiring problem can mimic compressor failure for far less money. If the compressor is truly done, we explain the trade-off between replacing it and replacing the whole outdoor unit, considering the system age, refrigerant type and overall condition. When replacement makes sense, we do it carefully so the new compressor lasts.
We test winding resistance, check for shorts to ground, measure locked-rotor amperage and rule out capacitor, contactor and control failures before concluding the compressor itself needs replacement.
A new compressor in an aging unit is not always wise. We weigh equipment age, coil condition and refrigerant type to recommend compressor replacement or a full system upgrade.
Existing refrigerant is recovered into certified cylinders using proper equipment, never vented, and we check it for signs of acid or burnout that would require additional cleanup steps.
We braze the new compressor in place while flowing nitrogen through the lines, preventing internal scale that could clog metering devices and damage the replacement compressor soon after startup.
Every compressor change includes a new filter drier, and after a burnout we may add a suction line drier to capture acid and contaminants left behind by the failed unit.
After a deep vacuum and standing test, we charge by weight, verify superheat and subcooling, measure running amperage and confirm the new compressor operates quietly within its specified range.
Compressor replacement is one of the most technical jobs in residential HVAC, and shortcuts show up quickly as a second failure. We follow the full process every time: proper recovery, nitrogen-purged brazing, new filter drier, deep evacuation and charging by measurement. That discipline protects your investment and gives the new compressor its best chance at a long service life.
We are equally careful with advice. If your system is older, uses R-22 or has a leaking coil, putting a new compressor into it may not be sensible, and we will say so clearly. If the rest of the system is in good shape, a compressor replacement can be an excellent value. Either way, homeowners in Roswell and Sandy Springs get honest options and workmanship they can count on.
Request a free estimate
We perform electrical and mechanical tests to verify the compressor has truly failed and identify any cause, such as low charge or bad wiring, that must be corrected too.
You receive a clear comparison between replacing the compressor alone and replacing the outdoor unit or full system, with honest pros and cons for each path forward.
We replace the compressor using proper brazing, drier and evacuation procedures, charge the system precisely and run it through full cooling cycles to verify reliable, efficient operation.
FAQ
Answers to the questions Roswell customers ask us most. Still unsure? Call (770) 661-0066.
Watch for an outdoor unit that hums or clicks but does not start, a breaker that trips when cooling begins, loud grinding or rattling from the outdoor cabinet and warm air while the indoor fan runs. Because a failed capacitor or contactor can cause the same symptoms, testing is essential before anyone recommends a new compressor.
It depends on the system's age, condition and refrigerant. A compressor replacement can be good value on a relatively young system that is otherwise sound. On older equipment, especially systems using R-22 or with corroded coils, investing in a new outdoor unit or full system often makes more sense. We compare both options with you.
Key factors include the compressor size and type, the refrigerant used, whether the old compressor burned out and contaminated the system, and how accessible the outdoor unit is. Single-stage, two-stage and variable-speed compressors differ significantly. After diagnosing the failure, we provide an upfront quote for both compressor replacement and the full replacement alternative.
The work itself usually takes most of a day, since it includes refrigerant recovery, removing and brazing in the new compressor, evacuation and charging. The bigger variable is parts availability, as the correct compressor may need to be ordered. We let you know the expected timeline when we confirm the diagnosis and approve the plan with you.
Common causes include long-term low refrigerant, a dirty outdoor coil, failed capacitors, electrical problems, overcharging and liquid refrigerant returning from a frozen indoor coil. In hot Roswell summers, those stresses add up quickly. We look for the underlying cause during every replacement, because ignoring it can lead the new compressor to fail the same way.
Free, no-obligation quote
Tell us what's going on and we'll get back to you with clear options and an upfront price.